Internal factors of wall mold: Internal factors are the decisive factors. In the case of mildew on the wall, fundamentally speaking, it is caused by the poor antibacterial and antifungal properties of interior decoration materials such as wallpaper and interior wall emulsion paint products. Due to the poor mildew resistance of the product, water vapor can easily penetrate into the inner layer of the wall, causing mold to easily breed.

The harm of mold:

It is ugly, and the biggest hazard is that the moldy wall will emit mold spores, which are very harmful to the human body.

Once mold spores flow in the air, they can easily enter the human body, invade the respiratory system, and multiply rapidly. Long-term contact and inhalation of mold can cause respiratory diseases and allergies, etc. People with low immunity may also cause headaches, fever, and inflammation of the skin or mucous membranes.

According to a study by experts from the National Institute of Health and Asthma is much more serious than asthma caused by pollen and animal fur allergies.

EspeciallyInfants and young children have weak body resistance , At the same time, the baby's skin is very soft, In the mold environment, it is also easy to cause skin diseases.

Studies have shown that the moldy walls in the home are 1.6 times more likely to suffer from asthma than those with healthy walls; If the parents in the family have a history of allergies, the risk of getting the disease is 7.3 times higher, so it must not be ignored! !

Especially in spaces with poor air circulation and the appearance of mold during the rainy season, it is almost an unavoidable problem. This has a lot to do with the interior decoration materials that have been used for a long time. Most interior wall decoration materials use latex paint and wallpaper First, the organic matter in latex paint is a good source of nutrition for mold, and the latex used for wallpapering is also a product rich in organic matter, which is more likely to grow mold than latex paint.  

The solution to indoor wall mold growth is to cut off the source of nutrition for mold growth and use non-organic wall decoration Materials include stone, cement, brick, mosaic, wood, etc. If you choose paint, you must choose inorganic paint, including water-based inorganic paint, dry powder inorganic paint (diatom mud, plaster, decorative mortar). Adding high doses of antifungal agents to latex paints and bactericidal antifungal coatings are not recommended for use at home. The main reason is that high doses of antifungal agents and fungicides have certain side effects on organisms including the human body. Antifungal fungicides are used in Anti-mold and sterilization also bring new pollution to the indoor environment, which affects the human body and other organisms, and some unqualified anti-mold coatings even cause harm to the human body. Especially sensitive groups.  

Simon A+ Inorganic coatings, choose the natural inorganic mineral potassium silicate as the binding agent in the coating Agent, the alkalinity with a pH value of up to 11 is killed in the spore state of the mold. The extremely low organic content is not conducive to the absorption of nutrients by mold. Mold cannot grow and reproduce on Simon A+ inorganic coating, and Simon A+ inorganic coating does not grow mold.  

Simon A+ inorganic coating against Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Salmonella typhimurium, Klebsiella pneumoniae The sterilization rate of bacteria is 99.9%, and the Simon A+ inorganic coating is anti-virus.