Simplicity is different from crudeness, simplicity is simplicity, delicacy is the basic connotation of minimalism, Simontin, a fashionable decorative material, extremely The representative of Jane, the core product of cement-based creative materials, the representative of the minimalist style, the wall of STYLE is the ultimate goal of many fans of creative micro-cement Simontin, how to achieve this goal? Simon United's technical training engineers teach you the following sunflower guide.

Basic requirements for the surface of the base course of Simontin construction: the surface should be flat and even, clean and free of oil stains, grease and dust. The strength is up to standard.

Application on different types of walls:
1) Treatment of wall base:
 1) If the base surface of concrete, cement and resin walls does not meet the requirements, it needs to be polished to remove pollutants, optimize surface adhesion, and fill holes or cracks. When the wall surface is in good condition, polish it properly and clean up the dust. Roll on primer. Then use Simontin coarse material to level the wall in stages.
2) Remove loose and cracked tiles or mosaics on the tile or mosaic wall, level the wall and remove surface grease or pollutants. Level gaps in walls with two-component professional putty. Then use Simontin coarse material to level the wall in stages.
 3) The wall is in good condition, and if it is not too smooth, it can be directly painted with primer. Smooth surface walls or floors should be polished to a rough surface before painting with primer.

II) Mixing of materials
Simontin=Simondin+ Tetin
Pour 5 liters of tertin into a clean 20 liter container, then add 15 kg of simentin and mix with a stirrer until completely homogeneous.

3) Wall construction:
Scrape evenly on the wall, and determine whether it is necessary to add glass fiber mesh according to the design requirements. It can be batched 1-2 times, and the interval between each layer of coating is 1-2 hours, until the ideal leveling effect is achieved.  
2) According to different design effects, use a spatula or combine with other construction tools to evenly apply the mixed siemontin fine material on the dry siemontin coarse material base surface Polishing, calendering or high-gloss decorative effects can be done by hand or mechanically.
3) Determine whether different texture effects need to be made according to the design requirements, and if necessary, related supporting products of Simontin can be used.
3) After it is completely dry, lightly sand it with 400-grit sandpaper and clean it up. Gloss or matt clear protective varnish can be applied as required.  

Cautions for use of Simontin
Humidity: below 75%. The technical proficiency and the artistic accomplishment of the construction master will directly affect the artistic effect of the wall. The skilled workers who should receive special training from Shenzhen Simon United Building Materials Co., Ltd. and have obtained work permits are the best for construction.