The fair-faced concrete floor is stylish, high-end and minimalist, and the seamless connection of the wall and the floor and the expansion of visual space give a high-standard design Teachers have unlimited creativity. Simontin, a cement-based creative material that can conveniently meet the designer's design requirements in a timely manner, is the ultimate goal of many fans of creative micro-cement Simontin, which represents STYLE with a minimalist core style. Simon United integrates European and American resources The direct establishment of a production plant and a technical training center in Shenzhen will teach you how to make a high-end atmospheric and minimalist fair-faced concrete floor.

The basic requirements for the surface of the construction base of the fair-faced concrete floor Simontin: the surface should be flat and even, clean and free of oil stains, grease and dust. The strength is up to standard.

1)Application on different types of ground:
1) Treatment of ground base:< ;/strong>
2) If the base surface of concrete, cement and resin does not meet the requirements, it needs to be polished to remove pollutants, optimize surface adhesion, and fill holes or cracks. When the wall surface is in good condition, polish it properly and clean up the dust. Roller primer. Then use Simontin coarse material to level the wall in stages.
3) Remove loose and cracked tiles or mosaics on the tile or mosaic floor, level the wall and remove surface grease or pollutants. Level gaps in walls with two-component professional putty. Then use Simontin coarse material to level the wall in stages.
4) The ground is in good condition, and if it is not too smooth, the primer can be applied directly. Smooth surface walls or floors should be polished to a rough surface before painting with primer.

2) Mixing of materials
Simontin=Simondin+ Tetin
Pour 5 liters of tertin into a clean 20 liter container, then add 15 kg of simentin and mix with a stirrer until completely homogeneous.

3) Ground construction:
1)Scrape the ground on the ground, and determine whether it is necessary to add glass fiber mesh according to the design requirements. It can be batched 1-2 times, and the interval between each layer of coating is 1-2 hours, until the ideal leveling effect is achieved.  
2) According to different design effects, apply the mixed siemontin fine material evenly on the base surface of the dried siemontin coarse material with a batch or in combination with other construction tools Polishing, calendering or high-gloss decorative effects can be done by hand or mechanically.
3) Determine whether different texture effects need to be made according to the design requirements, and if necessary, related supporting products of Simontin can be used.
4) After it is completely dry, lightly sand it with 400-grit sandpaper and clean it up. Super-abrasive protector for Simontin floors that can be painted glossy or matt as required.
5) Simontin super wear-resistant protective agent is a two-component protective agent. It should be mixed according to the ratio of the technical instructions on the product packaging. After mixing, it should be stirred evenly and used within 2 hours complete. It can be determined whether to add clean water to the mixed protective agent according to the weather or the wet condition of the ground.

Precautions for use of Simontin
The construction temperature is 5-35℃, and the air humidity is 75% the following. The technical proficiency and the artistic accomplishment of the construction master will directly affect the artistic effect of the wall. The skilled workers who should receive special training from Shenzhen Simon United Building Materials Co., Ltd. and have obtained work permits are the best for construction.