Product description: Fair-faced concrete protective agent is prepared from silicone resin and high-performance additives. Used together with other primers and intermediate coatings, fair-faced concrete protective agent can make the performance of the coating more excellent, maintain the decorative effect for a long time, and prolong the service life of the coating. Professional and high-quality fair-faced concrete transparent protective agent.

Fair-faced concrete protective agent features:
1. Form a dense, hard and tough transparent paint film to effectively protect the paint film of the top coat.  
2. Strong adhesion, good adhesion to various bases.  
3. Strong anti-ultraviolet ability, good aging resistance and temperature change resistance.  
4. Good air permeability, fast drying, and improved construction efficiency.  
5. It is hydrophobic and has excellent self-cleaning function.  
6. The paint film has good weather resistance, acid rain resistance, yellowing resistance, no cracks, mildew resistance and algae resistance.

Fair-faced concrete protective agent Uses:
Water-based metallic paint, real stone paint, texture paint, elastic intermediate paint and other architectural coatings, especially for marble Excellent surface performance for granite, fair-faced concrete, etc.  
Suitable for surface finishing and protection of various water-based exterior wall paints

Application technical points:
Clear water Concrete base treatment
(1) The base must be flat, solid, clean, free from looseness, peeling and shelling.    
(2) The floating soil, dust, oil and other impurities on the surface of the base should be removed before construction. Cracks, small holes and loose places should be repaired with cement mortar or putty.    
(3) The wall surface needs to be fully dry.
Finishing with silicone resin finish paint
(1) The silicone resin finish paint can only be applied after the inner coating is completely dry.
(2) Silicone acrylic finish paint is generally applied by spraying, and can also be applied by roller or brush.
(3) The finish paint should be applied in two coats, and the interval between the two coats should not be less than 2 hours.
(4) The finish paint must be stirred evenly before construction, depending on the consistency of the finish paint, add water to adjust the construction viscosity, generally not more than 5%.
(5) During the construction, it should be done one by one from top to bottom to ensure that the coating thickness of a wall is uniform.
(6) The joints during construction should be at the split joints as much as possible, not at the projection of the scaffolding, so as to avoid traces of the scaffolding.
(7) The amount of silicone resin finish paint varies depending on the flatness of the wall surface and the construction form:
Flat type decoration: 6~8m2/kg
Three-dimensional pattern , Multi-layer decoration: 5~7m2/kg