Simon wall and floor integrated porcelain paint is a new type of interior and exterior wall and floor coating system that has crossed the boundaries of the original wall paint and floor paint.
Suitable for interior and exterior wall ceilings and floors. It has the characteristics of convenient construction, wide application range, safety and reliability, wear resistance and scratch resistance.
It can be used to paint buildings and interior walls, floors, and ceilings as a whole, and it can also be used on interior decorations.
Product composition:
Waterborne polyurethane two-component product
Scope of use:
Wall surface: New walls include new walls such as cement, plaster, stone, and plastering putty layers, and old coatings include real stone paint, colorful, interior wall, and exterior wall coatings. Install the wall.
Floor: Protection or recoating of epoxy floor, cement base floor, wood, steel plate, old tile mosaic floor.
Performance advantages:
1) Environmental protection: water is used as the dispersion medium without pollution and will not cause environmental pollution, Low VOC content, in line with the requirements of environmental protection regulations.
2) Strong wear resistance and scratch resistance: the hardness can reach 3~4H; the coating film has good mechanical properties, high hardness, impact resistance and wear resistance.
3) Super strong adhesion: It has very strong adhesion, and can even be attached to the surface of tile mosaic.
4) Excellent weather resistance: It can withstand long-term sunlight and has strong UV resistance. It is suitable for indoor and outdoor floors and indoor and outdoor walls.
5) Overall seamless: the surface is smooth, the coating film looks beautiful, the color is adjustable, and the production and decoration effect can be customized according to the color of the customer's sample block.
6) Has a certain degree of flexibility: not only can provide excellent crack bridging, good protection for concrete, but also has the characteristics of sound attenuation and flexible foot feeling.
7) Good oil resistance and self-cleaning performance: strong impact resistance, good stain resistance; graffiti resistance, easy to clean, not easy to produce cracks during use, no need for waxing care, can be washed directly, easy to maintain maintainance.
8) The product can be toned. Gloss options: glossy, semi-matte, matte.
Grass-roots treatment:
Before construction, the floating ash, oil stains, Stains, mildew.
The loose place should be eradicated, and the flatness meets the design requirements. The strength of the wall and the ground meets the requirements for use.
施工:
在符合要求的基面上先施工配套专用底漆,再施工面涂。根据基面的情况和使用部位施工2-3遍面涂。可以采用滚涂或喷涂,喷涂时可以加20-30%的水稀释。
材料耗量:
10-20平米/公斤/遍,一般为一遍底漆两遍面漆。 深色或遮盖力不够的颜色可能需要更多遍。
混合:
本产品为AB双组分产品,A组份为乳液,B组份为固化剂。在使用前将B组份过滤 后缓缓加入到A组份中搅拌均匀后使用。混合好的产品应该在2小时内使用完毕,否则会反应凝固。
包装:
20公斤包装:A组份16公斤 ,B组份4公斤
5公斤包装: A组份4公斤 ,B组份1公斤
储存:
保存在通风良好5~35度环境中,保质期12个月。
当环境温度低于10℃,B料有时会出现少许结晶现象;如果出现结晶可以过滤后正常使用。